
Glock 19 / 23 / 32
Glock 19 / 23 / 32 Grip Tape
The 19 is the most carried handgun in America, and its frame is the part people change first. Look at photographs of well-used 19s and something has almost always been done to that grip — tape, a sleeve, or a soldering iron. That is not fashion. Polymer goes slick with sweat, and the 19 is small enough that losing purchase actually matters.
What this is
Laser-cut Cordura® 1000D panels that adhere to the frame. Not a replacement grip module, not a sleeve, and not skate tape. Real fabric texture that holds when your hands are wet, cold or gloved, and that will not abrade a concealment garment or the skin underneath it.
Fits: Glock 19, 23 and 32 — they share a compact frame. Available for Gen 3, 4, 5 and 6.
Which generation do I have?
- Check the right side of the slide first. Glock marks the generation there from Gen 4 onward. If you see GEN4, GEN5 or GEN6, you are done.
- No marking? Look at the front of the grip. Finger grooves and an accessory rail means Gen 3. No rail and no finger grooves means Gen 2.
- Gen 5 versus Gen 6 — both dropped the finger grooves and added the flared magwell, so go by the slide marking.
Why not stippling
Stippling works, and it out-grips fabric. It is also permanent, it devalues the frame, and it is aggressive enough that daily appendix carry will sand through the inside of a shirt within a month. A wrap gives you comparable purchase, comes off clean, and can be changed when you get bored of the colour.
Complete the setup
A 19 is usually carried with a light and often an optic. We cut wraps for both from the same fabric in the same colorways, so a matched set actually matches — Streamlight TLR-7 and TLR-1, SureFire X300 and XC1, Holosun 407C, 507C and 508T, plus magazine wraps and base pad strips.
Shop the Glock 19 / 23 / 32 grip wrap · All Glock grip tape · See every colorway · Installation guide
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. “GLOCK” is a federally registered trademark of GLOCK, Inc. Neither Combat Textiles LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H.




