CTX Cordura 1000D Cheek Riser Wrap Kit for Magpul Low Riser Kit (0.25 + 0.50 in)
If it does not fit yours, email us and we will work it out.
10,000+ rounds in the field.
No residue, no effect on resale.
From Berry-compliant Cordura® fabric.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by Ruger, Remington or Magpul. Those names are trademarks of their respective owners and are used here solely to identify the products this item is designed to fit. The trademark owners do not warrant or represent this product's compatibility with their products.
Product details
Laser-cut Cordura® 1000D wraps for the Magpul Low Cheek Riser Kit (MAG463). Adheres to the polymer — nothing is removed, nothing is permanent, and it comes off clean whenever you want it off.
Not sure which riser you have? Which riser do I need? See the size table.
What's included: two wraps, one for the 0.25 in riser and one for the 0.50 in riser. Swap risers without buying another wrap.
Fits: the 0.25 in and 0.50 in risers on the Magpul Hunter American (Ruger American short action) and Hunter 700 / 700L (Remington 700), and on any Magpul SGA or Hunter X-22 stock fitted with the Low Cheek Riser Kit. Running the Standard riser that came on your Hunter X-22 or SGA stock? That wrap is included with our Hunter X-22, SGA Mossberg 500/590 and SGA Remington 870 kits. For the 0.75 in riser, see our High Riser Kit.
Which riser do I need?
Magpul's Hunter and SGA stocks share one cheek riser system in four heights, and each height has its own cut.
| Riser height | Combat Textiles wrap |
|---|---|
| Standard (no-rise, 0.00 in) | Included with our Hunter X-22, SGA Mossberg 500/590 and SGA Remington 870 kits |
| 0.25 in | Low Riser Kit |
| 0.50 in | Both the Low Riser Kit and the High Riser Kit |
| 0.75 in | High Riser Kit |
The Low Riser Kit includes two wraps: 0.25 in and 0.50 in. The High Riser Kit includes two wraps: 0.50 in and 0.75 in. The 0.50 in wrap comes in both kits.
The riser is the part of the stock your face lives on. Bare polymer is slick and cold at exactly the moment you want the same cheek weld every time, and it is also the part that rubs on a truck seat, a gun case and a safe door. Cordura gives your cheek a consistent, dry texture and takes the scuffs the finish would otherwise take.
- Cordura® 1000D, MIL-DTL-32439 compliant. IR compliant and Berry compliant.
- 3M Low Surface Energy adhesive. Grips mechanically rather than bonding chemically to the polymer, so it lifts off clean.
- No gunsmithing. Nothing is drilled, sanded or refinished.
- Installs in minutes. Alcohol wipe, peel, place, press. A 20-minute window to lift and reposition before the adhesive sets.
- Designed and cut in the USA from Berry-compliant Cordura® fabric.
Wrap only — the cheek riser, stock and firearm are not included.
Complete the setup
Peel. Place. Press.
Alcohol wipe
Wipe the frame with the included isopropyl pad and let it dry completely. Thirty seconds of prep is the difference between years of grip and a lifted corner.
Peel & place
Panels are die-cut for this exact frame. Line up the top edge first, then lay on lightly. You have a 20-minute window to lift and reposition as many times as you need.
Press firm
Firm pressure across every panel and edge to activate the adhesive. Give it 20 minutes before you holster or carry — then it's set.
Optional: a quick pass with a blow dryer before pressing gives a stronger bond — but makes later removal harder.
