CTX Cordura 1000D Grip Kit for Magpul Hunter X-22
If it does not fit yours, email us and we will work it out.
10,000+ rounds in the field.
No residue, no effect on resale.
From Berry-compliant Cordura® fabric.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by Ruger or Magpul. Those names are trademarks of their respective owners and are used here solely to identify the products this item is designed to fit. The trademark owners do not warrant or represent this product's compatibility with their products.
Product details
Laser-cut Cordura® 1000D panels for the pistol grip of Magpul's polymer stock for the Ruger 10/22. Adheres to the stock — nothing is removed, nothing is permanent, and it comes off clean whenever you want it off.
Fits: the pistol-grip area of Magpul Hunter X-22 stocks. Other 10/22 stocks have their own shapes and may not fit this cut.
Adding the cheek riser? The Hunter X-22 Standard riser wrap is a separate kit in the same fabric. Which riser do I need?
Molded polymer is fine on a dry bench and slick the moment your hands are cold, wet or gloved. The weave gives your firing hand something to hold on to, stays dry to the touch, and keeps its bite through a long day at the range or in the field.
- Cordura® 1000D, MIL-DTL-32439 compliant. IR compliant and Berry compliant.
- 3M Low Surface Energy adhesive. Grips mechanically rather than bonding chemically, so it lifts off clean and takes the adhesive with it.
- About half a millimetre of added thickness. You keep the stock's shape; you just gain traction.
- Installs in minutes. Alcohol wipe, peel, place, press. A 20-minute window to lift and reposition before the adhesive sets.
- Designed and cut in the USA from Berry-compliant Cordura® fabric.
Wrap only — the stock and rifle are not included.
Complete the setup
Peel. Place. Press.
Alcohol wipe
Wipe the frame with the included isopropyl pad and let it dry completely. Thirty seconds of prep is the difference between years of grip and a lifted corner.
Peel & place
Panels are die-cut for this exact frame. Line up the top edge first, then lay on lightly. You have a 20-minute window to lift and reposition as many times as you need.
Press firm
Firm pressure across every panel and edge to activate the adhesive. Give it 20 minutes before you holster or carry — then it's set.
Optional: a quick pass with a blow dryer before pressing gives a stronger bond — but makes later removal harder.
